blib/lib/Bio/Graphics/Glyph/fb_shmiggle.pm untested

filter: Statementstmt 0.0% 0 / 338 Branchbran 0.0% 0 / 140 Conditioncond 0.0% 0 / 16 MC/DCmcdc n/a Subroutinesub 0.0% 0 / 9 Podpod 0.0% 0 / 4 totaltotal 0.0% 0 / 507 CC 71 SCAR 72.0
CC
71
Cov
0%
getData
1980.0
draw
702.0
openDataFiles
12.0
CRAP 1334.4
1 package Bio::Graphics::Glyph::fb_shmiggle;
2  
3 # [ to see proper formatting set tab==2 ]
4 #
5 # 2009-2010 Victor Strelets, FlyBase.org
6  
7 use constant DEBUG => 0;
8  
9 #use strict;
10 use GD;
11 use vars '@ISA';
12 use Bio::Graphics::Glyph::generic;
13 BEGIN{ @ISA = 'Bio::Graphics::Glyph::generic';
14 local($colors_selected,$black,$red,$white,$grey);
15 @colors= ();
16 @colcycle= (
17 # red/orange
18 'A62A2A', # +
19 'CC3299', # +
20 'FF7F00', # +
21 # yellow/brown
22 'B87333', # +
23 # greenish
24 '6B8E23', # +
25 '238E68', # +
26 # blue/violet
27 '6982CA', # +
28 '2222AD', # +
29 );
30 %Indices= ();
31 local(*DATF);
32 }
33
34 #--------------------------
35 sub draw {
36 my $self = shift;
37 my $gd = shift;
38 my ($left,$top,$partno,$total_parts) = @_;
39 my $ft= $self->feature;
40 my $ftid= $ft->{id};
41 my $pn= $self->panel;
42 my $fgc = $self->fgcolor;
43 my $bgc = $self->bgcolor;
44 my($r,$g,$b);
45  
46 unless( $colors_selected ) {
47 $black= $gd->colorClosest(0,0,0);
48 $yellow= $gd->colorClosest(255,255,0);
49 $white= $gd->colorClosest(255,255,255);
50 $red= $gd->colorClosest(255,0,0);
51 $lightgrey= $gd->colorClosest(225,225,225);
52 $grey= $gd->colorClosest(200,200,200);
53 $darkgrey= $gd->colorClosest(125,125,125);
54 foreach my $ccc ( @colcycle ) {
55 if( $ccc=~/^[#]?(\S\S)(\S\S)(\S\S)$/ ) {
56 ($r,$g,$b)= ($1,$2,$3);
57 eval('$r=hex("0x'.$r.'");');
58 eval('$g=hex("0x'.$g.'");');
59 eval('$b=hex("0x'.$b.'");');
60 }
61 my $c= $gd->colorClosest($r,$g,$b);
62 push(@colors,$c);
63 }
64 $colors_selected= 1;
65 }
66  
67 my($pnstart,$pnstop)= ($pn->start,$pn->end); # in seq coordinates
68 my $nseqpoints= $pnstop - $pnstart + 1;
69 my($xf1,$yf1,$xf2,$yf2)= $self->calculate_boundaries($left,$top);
70 my $leftpad= $pn->pad_left;
71 my $datadir= $ENV{SERVER_PATH} . $ft->{datadir};
72
73 my($start,$stop)= $pn->location2pixel(($ft->{start},$ft->{end}));
74 my $ftscrstop= $stop + $leftpad;
75 my $ftscrstart= $start + $leftpad;
76  
77 my $chromosome= $ft->{ref};
78 #warn("pn start stop leftpad nseq dir = $pnstart $pnstop $leftpad $datadir $chromosome\n");
79 my $flipped= $self->{flip} ? 1 : 0;
80 my($subsets,$subsetsnames,$signals)= $self->getData($ft,$datadir,$chromosome,$pnstart,$pnstop,$xf1,$xf2,$flipped);
81  
82 my $poly_pkg = $self->polygon_package;
83  
84 my @orderedsubsets= @{$subsets};
85 my $nsets= $#orderedsubsets+1;
86 my($xstep,$ystep)= (2,int(100.0/$nsets));
87 $ystep= 7 unless $ystep>=7; # empiricaly found - to read lines of tiny fonts
88 $ystep= 12 if $ystep>12; # empirically found - to preserve topo feel when number of subsets is small
89 $ystep= 7 if $ystep>7; # tmp unification
90 my($xw,$yw)= ( $nsets*$xstep, ($nsets-1)*$ystep );
91  
92 my $polybg= $poly_pkg->new();
93 $polybg->addPt($xf1,$yf2-$yw);
94 $polybg->addPt($xf2,$yf2-$yw);
95 $polybg->addPt($xf2-$xw, $yf2);
96 $polybg->addPt($xf1-$xw, $yf2);
97 $gd->filledPolygon($polybg,$lightgrey); # background
98 for( my $xx= $xf1+2; $xx<$xf2; $xx+=6 ) { $gd->line($xx,$yf2-$yw,$xx-$xw,$yf2,$grey); } # grid-helper
99
100 my $xshift= 0;
101 my $yshift= $nsets * $ystep;
102 ($r,$g,$b)= (10,150,80);
103 my $colcycler= 0;
104 my @screencoords= @{$signals->{screencoords}};
105 my $max_signal= 30;
106 my $koeff= 4;
107 if( exists $signals->{max_signal} ) {
108 $max_signal= $signals->{max_signal};
109 $koeff= 80.0/$max_signal;
110 }
111 my $predictor_cutoff= int($max_signal*0.95); # empirically found
112 my @prevx= ();
113 my @prevy= ();
114 my @prevvals= ();
115 my $profilen= 0;
116 my %SPEEDUP= ();
117 foreach my $subset ( @orderedsubsets ) {
118 my $edgecolor= ($xshift==0) ? $black : $yellow;
119 #my $color= ($xshift==0) ? $darkgrey : $gd->colorClosest(oct($r),oct($g),oct($b));
120 my $color= ($profilen==0) ? $darkgrey : $colors[$colcycler];
121 $xshift -= $xstep;
122 $yshift -= $ystep;
123 my @values= @{$signals->{$subset}};
124 my($xold,$yold)= ($xf1+$xshift,$yf2-$yshift+1);
125 my $xpos= 0;
126 my $poly= $poly_pkg->new();
127 $poly->addPt($xold,$yold+1);
128 my @allx= ($xold);
129 my @ally= ($yold);
130 my @allvals= (0);
131 my $runx= $xf1 + $xshift;
132 foreach my $val ( @values ) {
133 $scrx += $leftpad;
134 my $x= $screencoords[$xpos] + $xshift;
135 my $visval;
136 if( exists $SPEEDUP{$val} ) { $visval= $SPEEDUP{$val}; }
137 else { $visval= int($val*$koeff); $SPEEDUP{$val}= $visval; }
138 my $y= $yf2 - $yshift - $visval;
139 push(@allx,$x);
140 push(@ally,$y);
141 push(@allvals,$visval);
142 if( $xpos>0 ) {
143 $poly->addPt($x,$y+1);
144 }
145 ($xold,$yold)= ($x,$y);
146 $xpos++;
147 }
148 $poly->addPt($xf2+$xshift, $yf2-$yshift+1);
149 $gd->filledPolygon($poly,$color) unless $profilen==0; # not on MAX predictor
150 ($xold,$yold)= ($allx[0],$ally[0]);
151 for( my $en=1; $en<=$#allx; $en++ ) {
152 my $x= $allx[$en];
153 my $y= $ally[$en];
154 $gd->line($xold,$yold,$x,$y,$edgecolor);
155 ($xold,$yold)= ($x,$y);
156 }
157 if( $profilen==0 ) { # drawing mRNA (cutoff-based) predictor on MAX subset
158 my($xxx,$yyy)= ($allx[1]-1,$yf2-$yw);
159 $gd->line($xxx-4,$yyy,$xxx-2,$yyy,$black);
160 $gd->string(GD::Font->Tiny,$xxx-12, $yyy-3,'0',$black);
161 $gd->line($xxx-2,$yyy,$xxx-2,$yyy-50,$black);
162 $gd->line($xxx-4,$yyy-47,$xxx-2,$yyy-50,$black);
163 $gd->line($xxx,$yyy-47,$xxx-2,$yyy-50,$black);
164 $gd->line($xxx-4,$yyy-44,$xxx-2,$yyy-44,$black);
165 $gd->string(GD::Font->Tiny,$xxx-18, $yyy-47,$max_signal,$black);
166 my($inexon,$exstart,$exend,$ymax)= (0,0,0,999);
167 for( my $en=1; $en<=$#allx; $en++ ) {
168 my $y= $ally[$en];
169 $ymax= $y if $y < $ymax;
170 if( $allvals[$en]>=$predictor_cutoff ) {
171 my $x= $allx[$en];
172 unless( $inexon ) { $inexon= 1; $exstart= $x; } # start exon
173 $exend= $x;
174 }
175 elsif( $inexon ) { # end exon and draw it
176 $inexon= 0;
177 $ymax -= 6;
178 my $allowedymax= $yf2-$yshift-45;
179 $ymax= $allowedymax if $ymax < $allowedymax; # set limit for huge peaks
180 $gd->line($exstart,$ymax,$exstart,$ymax+2,$red);
181 $gd->line($exstart,$ymax,$exend,$ymax,$red);
182 $gd->line($exend,$ymax,$exend,$ymax+2,$red);
183 ($inexon,$exstart,$exend,$ymax)= (0,0,0,999);
184 }
185 }
186 if( $inexon ) { # exon which ends beyond this screen
187 $ymax -= 6;
188 my $allowedymax= $yf2-$yshift-45;
189 $ymax= $allowedymax if $ymax < $allowedymax; # set limit for huge peaks
190 $gd->line($exstart,$ymax,$exstart,$ymax+2,$red);
191 $gd->line($exstart,$ymax,$exend,$ymax,$red);
192 }
193 }
194 if( 0 && $profilen>1 ) { # blocked - drawing roof lines doesn't work well with this view..
195 for( my $en=3; $en<=$#allx; $en+=6 ) {
196 next if $allvals[$en]==0 || $prevvals[$en]==0;
197 my $y= $ally[$en];
198 $yold= $prevy[$en];
199 if( $yold<$y ) {
200 my $x= $allx[$en];
201 $xold= $prevx[$en];
202 $gd->line($xold,$yold,$x,$y,$darkgrey);
203 }
204 }
205 }
206 $gd->string(GD::Font->Tiny,$xf2+$xshift+3, $yf2-$yshift-5,$subsetsnames->{$subset},$color);
207 $colcycler++;
208 $colcycler= 0 if $colcycler>$#colors;
209 unless( $profilen==0 ) { @prevx= @allx; @prevy= @ally; @prevvals= @allvals; }
210 $profilen++;
211 }
212
213 return;
214 }
215  
216 #--------------------------
217 sub getData {
218 my $self = shift;
219 my($ft,$datadir,$chromosome,$start,$stop,$scrstart,$scrstop,$flipped) = @_;
220 my %Signals= ();
221 $self->openDataFiles($datadir);
222 my @subsets= (exists $ft->{'subsetsorder'}) ? @{$ft->{'subsetsorder'}} : sort split(/\t+/,$Indices{'subsets'});
223 shift(@subsets) if $subsets[0] eq 'MAX';
224 warn("subsets: @subsets\n") if DEBUG;
225 my %SubsetsNames= (exists $ft->{'subsetsnames'}) ? %{$ft->{'subsetsnames'}} : map { $_, $_ } @subsets;
226 $SubsetsNames{MAX}= 'MAX';
227 my $screenstep= ($scrstop-$scrstart+1) * 1.0 / ($stop-$start+1);
228 my $donecoords= 0;
229 foreach my $subset ( @subsets ) {
230 my $nstrings= 0;
231 # scan seq ranges offsets to see where to start reading
232 my $key= $subset.':'.$chromosome;
233 my $poskey= $key.':offsets';
234 my $ranges_pos= (exists $Indices{$poskey}) ? int($Indices{$poskey}) : -1;
235 if( $ranges_pos == -1 ) { next; } # no such signal..
236 warn(" positioning for $poskey starts at $ranges_pos\n") if DEBUG;
237 if( $start>=1000000 ) {
238 my $bigstep= int($start/1000000.0);
239 if( exists $Indices{$key.':offsets:'.$bigstep} ) {
240 my $jumpval= $Indices{$key.':offsets:'.$bigstep};
241 warn(" jump in offset search to $jumpval\n") if DEBUG;
242 $ranges_pos= int($jumpval); }
243 }
244 seek(DATF,$ranges_pos,0);
245 my($offset,$offset1)= (0,0);
246 my $lastseqloc= -999999999;
247 my $useoffset= 0;
248 while( (my $strs=<DATF>) ) {
249 $nstrings++ if DEBUG;
250 if( DEBUG ) {
251 chop($strs); warn(" positioning read for coord $start ($strs)\n"); }
252 last unless $strs=~m/^(-?\d+)[ \t]+(\d+)/;
253 my($seqloc,$fileoffset)= ($1,$2);
254 if( DEBUG ) {
255 chop($strs); warn(" positioning read for $poskey => $seqloc, $fileoffset ($strs)\n"); }
256 $offset1= $offset;
257 $offset= $fileoffset;
258 $lastseqloc= $seqloc;
259 if( $seqloc > $start ) { $useoffset= int($offset1); last; }
260 }
261 warn(" will use offset $useoffset\n") if DEBUG;
262 warn(" (scanned $nstrings offset strings)\n") if DEBUG;
263 if( $useoffset==0 ) { # data offset cannot be 0 - means didn't find where to read required data..
264 next;
265 my @emptyvals= ();
266 for( my $ii= $scrstart; $ii++ <= $scrstop; ) { push(@emptyvals,0); }
267 $Signals{$subset}= \@emptyvals;
268 }
269 $nstrings= 0;
270 # read signal profile
271 seek(DATF,$useoffset,0);
272 $lastseqloc= -999999999;
273 my $lastsignal= 0;
274 my($scrx,$scrxold)= ($scrstart,$scrstart-1);
275 my $runmax= 0;
276 my @values= ();
277 my @xscreencoords= ();
278 while( (my $str=<DATF>) ) {
279 $nstrings++ if DEBUG;
280 unless( $str=~m/^(-?\d+)[ \t]+(\d+)/ ) {
281 warn(" header read: $str") if DEBUG;
282 last; # because no headers were indexed at the beginning of data packs
283 }
284 my($seqloc,$signal)= ($1,$2);
285 warn(" signal read: $seqloc, $signal line: $str") if DEBUG;
286 last if $lastseqloc > $seqloc; # just in case, as all sits merged in one file..
287 if( $seqloc>=$start ) { # current is the next one after the one we need to start from..
288 unless( $lastseqloc== -999999999 ) { # expand previous
289 $lastseqloc= $start-2 if $lastseqloc<$start; # limit empty steps (they may start from -200000)
290 while( $lastseqloc < $seqloc ) { # until another (one we just retrieved) wiggle reading
291 last if $lastseqloc > $stop; # end of subset data
292 next if $lastseqloc++ < $start;
293 # we have actual new seq position in our required range
294 my $scrpos= int($scrx);
295 $runmax= $lastsignal if $runmax < $lastsignal;
296 if( $scrpos != $scrxold ) { # we have actual new seq _and_ screen position
297 push(@values,$runmax);
298 push(@xscreencoords,$scrpos) unless $donecoords;
299 $scrxold= $scrpos;
300 $runmax= 0;
301 }
302 $scrx += $screenstep; # remember - it is not integer
303 }
304 }
305 }
306 ($lastseqloc,$lastsignal)= ($seqloc,$signal);
307 last if $seqloc > $stop; # end of subset data
308 }
309 if( $lastseqloc < $stop ) { # if on the end of signal profile, but still in screen range
310 # just assume that we are getting one more reading with signal == 0
311 my $signal= 0;
312 while( $lastseqloc++ < $stop ) {
313 my $scrpos= int($scrx);
314 if( $scrpos != $scrxold ) { # we have actual new seq _and_ screen position
315 push(@values,$signal);
316 push(@xscreencoords,$scrpos) unless $donecoords;
317 $scrxold= $scrpos;
318 }
319 $scrx += $screenstep;
320 }
321 }
322 warn(" (scanned $nstrings signal strings)\n") if DEBUG;
323 $nstrings= 0;
324 if( $flipped ) {
325 my @ch= reverse @values; @values= @ch;
326 }
327 warn(" ".$subset."=> ".@values." values @values\n") if DEBUG && $#values<1000;
328 $Signals{$subset}= \@values;
329 $Signals{screencoords}= \@xscreencoords unless $donecoords;
330 $donecoords= 1;
331 } # foreach my $subset ( @subsets ) {
332 if( exists $Indices{max_signal} ) {
333 $Signals{max_signal}= $Indices{max_signal};
334 warn(" max_signal=> ".$Indices{max_signal}." \n") if DEBUG;
335 }
336 # prepare MAX profile - will be used as a base for exon/UTR prediction
337 my @maxprofile= ();
338 my @ruler= @{$Signals{screencoords}};
339 for( my $npos= 0; $npos<=$#ruler; $npos++ ) {
340 my $maxval= 0;
341 foreach my $subset ( @subsets ) {
342 my $p= $Signals{$subset};
343 my $val= $p->[$npos];
344 $maxval= $val if $maxval < $val;
345 }
346 push(@maxprofile,$maxval);
347 }
348 $Signals{MAX}= \@maxprofile;
349 warn(" MAX=> ".@maxprofile." values @maxprofile\n") if DEBUG && $#maxprofile<1000;
350 unshift(@subsets,'MAX');
351
352 return(\@subsets,\%SubsetsNames, \%Signals);
353 }
354  
355 #--------------------------
356 sub openDataFiles {
357 my $self = shift;
358 my $datadir= shift;
359 $datadir.= '/' unless $datadir=~m|/$|;
360 my $datafile= $datadir.'data.cat';
361 open(DATF,$datafile) || warn("cannot open $datafile\n");
362 use BerkeleyDB; # caller should already used proper 'use lib' command with path
363 my $bdbfile= $datadir . 'index.bdbhash';
364 tie %Indices, "BerkeleyDB::Hash", -Filename => $bdbfile, -Flags => DB_RDONLY || warn("can't read BDBHash $bdbfile\n");
365 if( DEBUG ) { foreach my $kk ( sort keys %Indices ) { warn(" $kk => ".$Indices{$kk}."\n"); } }
366 return;
367 }
368  
369 1;
370  
371  
372 =pod
373  
374 =head1 TopoView Glyph
375  
376 =begin html
377  
378 <i>Warning:</i> This software is still in the developmental stage and is distributed
379 "as is", without packaging and in the same exact condition as currently used by FlyBase.
380 You are free to use it, modify and develop further, but proper reference
381 to the original author and FlyBase is required.
382  
383 <p>
384  
385 "fb_shmiggle.pm" TopoView (AKA shmiggle) glyph was developed for fast
386 3D-like demonstration of RNA-seq data consisting of multiple
387 individual subsets. Main purposes were to compact presentation as
388 much as possible (in one reasonably sized track) and
389 to allow easy visual detection of coordinated behavior
390 of the expression profiles of different subsets.
391  
392 <p>
393  
394 It was found that log2 conversion dramatically changes
395 perception of expression profiles and kind of illuminates
396 coordinated behavior of different subsets. Glyph and data
397 indexer/formatter were in fact modified with the assumption
398 that final data produced by indexer/formatter will always
399 be a log2 conversion of the original coverage, therefore
400 represented by short integer with values in range of 0-200
401 or so.
402  
403 <p>
404  
405 Comparing performance (retrieval of several Kbp of data profiles
406 for several subsets of some RNA-seq experiment) of wiggle binary
407 method and of several possible alternatives, it was discovered that
408 one of the approaches remarkably outperforms wiggle bin method
409 (although it requires several times more space for formatted data
410 storage). Optimal storage/retrieval method stores all experiment
411 data (all subsets of the experiment) in one text file, where
412 structure of the file in fact is one of the most simple wiggle
413 (coverage files) formats with the addition of some positioning
414 data (two-column format, without runlength specification, without
415 omission of zero values). This is the only format which glyph is able
416 to handle (there are many reasons for that) so any modification
417 of indexer/formatter _must_ produce exact equivalent of that
418 format. In my experience, 90% of the debugging with new incoming
419 data was related to
420 the problems of that exact format conversion. Example of the formatted
421 data:
422  
423 <br>
424  
425 <pre>
426 # subset=BS107_all_unique chromosome=2LHet
427 -200000 0
428 0 0
429 19955 1
430 19959 0
431 19967 2
432 19972 0
433 19977 2
434 20027 0
435 20031 2
436 20035 0
437 20043 1
438 20045 0
439 20049 1
440 20055 0
441 20062 2
442 20069 0
443 20073 2
444 20082 0
445 20097 3
446 20115 0
447 20125 3
448 20127 0
449 20134 3
450 20139 0
451 20140 3
452 20144 0
453 20145 3
454 20150 0
455 20157 3
456 20162 0
457 20172 3
458 20183 0
459 </pre>
460  
461 <p>
462  
463 Glyph is supplied with a "index_cov_files.pl" data indexer/formatter
464 which is converting original coverage (wiggle) files into data structure which will
465 be used for fast retrieval. You should run this script in some separate directory,
466 containing original coverage files (gzipped form works too). After it finishes,
467 directory will contain two new files: data.cat and index.bdbhash. Both files required
468 for data retrieval by glyph. Files can be moved freely between different directories
469 or even operational systems (Mac and PC included, I think). Content of the dat file
470 is subject of accurate check - this is if you want to avoid long debugging sessions
471 on the level of running GBrowse. Size of files is quite big, but in my experience it
472 is like twice less than gzipped size of all initial coverage files - which is quite
473 acceptable.
474  
475 <p>
476  
477 Example of GBrowse conf file insert (shows actual FlyBase config sections for
478 Baylor and modENCODE RNA-seq tracks):
479  
480 <br>
481 <pre>
482 [baylor_wiggle]
483 feature = RNAseq_profile:Baylor
484 glyph = fb_shmiggle
485 height = 124
486 bgcolor = sub { my $f= shift;
487 $f->{datadir}= '/.data/genomes/dmel/current/rnaseq-gff/baylor/'; # trick it this way..
488 my @subsetsorder= qw(
489 E2-4hr
490 E2-16hr
491 E2-16hr100
492 E14-16hr
493 L
494 L3i
495 L3i100
496 P
497 P3d
498 MA3d
499 FA3d
500 A17d
501 );
502 $f->{subsetsorder}= \@subsetsorder;
503 return 'lightgrey';
504 }
505 key = Baylor group RNA-seq coverage by subsets (devel.stages) [log2 converted]
506 category = RNA-seq data
507 label = ""
508 title = ""
509 link = sub { my $f= shift;
510 my $id= $f->{'id'};
511 my $lnk="javascript:void(0);";
512 "$lnk\" id=\"$id\" onmouseover=\"showdata_description('Baylor');return false;\" onmouseout=\"delsumm_overlib();";
513 }
514  
515 [celniker_wiggle]
516 feature = RNAseq_profile:Celniker
517 glyph = fb_shmiggle
518 height = 250
519 bgcolor = sub { my $f= shift;
520 $f->{datadir}= '/.data/genomes/dmel/current/rnaseq-gff/celniker/'; # trick it this way..
521 my @subsetsorder= qw(
522 BS40_all_unique
523 BS43_all_unique
524 BS46_all_unique
525 BS49_all_unique
526 BS54_all_unique
527 BS55_all_unique
528 BS58_all_unique
529 BS62_all_unique
530 BS66_all_unique
531 BS67_all_unique
532 BS71_all_unique
533 BS73_all_unique
534 BS107_all_unique
535 BS111_all_unique
536 BS113_all_unique
537 BS196_all_unique
538 BS200_all_unique
539 BS203_all_unique
540 BS129_all_unique
541 BS133_all_unique
542 BS136_all_unique
543 BS137_all_unique
544 BS140_all_unique
545 BS143_all_unique
546 BS150_all_unique
547 BS156_all_unique
548 BS162_all_unique
549 BS153_all_unique
550 BS159_all_unique
551 BS165_all_unique
552 );
553 $f->{subsetsorder}= \@subsetsorder;
554 my %subsetsnames= qw(
555 BS40_all_unique em0-2hr
556 BS43_all_unique em2-4hr
557 BS46_all_unique em4-6hr
558 BS49_all_unique em6-8hr
559 BS54_all_unique em8-10hr
560 BS55_all_unique em10-12hr
561 BS58_all_unique em12-14hr
562 BS62_all_unique em14-16hr
563 BS66_all_unique em16-18hr
564 BS67_all_unique em18-20hr
565 BS71_all_unique em20-22hr
566 BS73_all_unique em22-24hr
567 BS107_all_unique L1
568 BS111_all_unique L2
569 BS113_all_unique L3_12hr
570 BS196_all_unique L3_PS1-2
571 BS200_all_unique L3_PS3-6
572 BS203_all_unique L3_PS7-9
573 BS129_all_unique WPP
574 BS133_all_unique WPP_12hr
575 BS136_all_unique WPP_24hr
576 BS137_all_unique WPP_2days
577 BS140_all_unique WPP_3days
578 BS143_all_unique WPP_4days
579 BS150_all_unique AdM_Ecl_1days
580 BS156_all_unique AdM_Ecl_5days
581 BS162_all_unique AdM_Ecl_30days
582 BS153_all_unique AdF_Ecl_1days
583 BS159_all_unique AdF_Ecl_5days
584 BS165_all_unique AdF_Ecl_30days
585 );
586 $f->{subsetsnames}= \%subsetsnames;
587 return 'lightgrey';
588 }
589 key = modENCODE Transcription Group RNA-seq coverage (unique reads only) by subsets (devel. stages) [log2 converted]
590 category = RNA-seq data
591 label = ""
592 title = ""
593 link = sub { my $f= shift;
594 my $id= $f->{'id'};
595 my $lnk="javascript:void(0);";
596 "$lnk\" id=\"$id\" onmouseover=\"showdata_description('Celniker');return false;\" onmouseout=\"delsumm_overlib();";
597 }
598 </pre>
599 <br>
600  
601 In configuration, it is very important to set 'datadir' variable (relative
602 to server DOCUMENT_ROOT) so that glyph will know where to take data and index.
603  
604 <br>
605 <br>
606  
607 Setting 'subsetsorder' allows you to display expression profiles of subsets in
608 some predefined order. If setting omitted, glyph will display sets in alphabetical
609 order of the initial subsets names.
610  
611 <br>
612 <br>
613  
614 Setting 'subsetsnames' allows to rename subsets (very important as in most cases
615 workflow names of subsets are unsutable for intelligent data display to end users).
616 If setting omitted, initial subsets names will be used for display.
617  
618 <p>
619  
620 For the glyph to be properly activated, you need to insert in all of your GFF files
621 (ones for which you have RNA-seq data) virtual contig-long features which will activate
622 expression data display. To cover whole range of the contig (chromosome arm), it is
623 better to use coordinates presented in 'sequence-region' definition at the top of GFF file.
624 Example of such feature lines for FlyBase data is shown below:
625  
626 <p>
627 <pre>
628 2LHet Baylor RNAseq_profile 1 368874 . + . Comment=This is a reference feature for RNAseq wiggle tracks
629 2L Baylor RNAseq_profile 1 23011544 . + . Comment=This is a reference feature for RNAseq wiggle tracks
630 2RHet Baylor RNAseq_profile 1 3288763 . + . Comment=This is a reference feature for RNAseq wiggle tracks
631 2R Baylor RNAseq_profile 1 21146708 . + . Comment=This is a reference feature for RNAseq wiggle tracks
632 3LHet Baylor RNAseq_profile 1 2555493 . + . Comment=This is a reference feature for RNAseq wiggle tracks
633 3L Baylor RNAseq_profile 1 24543557 . + . Comment=This is a reference feature for RNAseq wiggle tracks
634 3RHet Baylor RNAseq_profile 1 2517509 . + . Comment=This is a reference feature for RNAseq wiggle tracks
635 3R Baylor RNAseq_profile 1 27905053 . + . Comment=This is a reference feature for RNAseq wiggle tracks
636 4 Baylor RNAseq_profile 1 1351857 . + . Comment=This is a reference feature for RNAseq wiggle tracks
637 XHet Baylor RNAseq_profile 1 204113 . + . Comment=This is a reference feature for RNAseq wiggle tracks
638 X Baylor RNAseq_profile 1 22422827 . + . Comment=This is a reference feature for RNAseq wiggle tracks
639 YHet Baylor RNAseq_profile 1 347040 . + . Comment=This is a reference feature for RNAseq wiggle tracks
640 </pre>
641 <p>
642  
643 Questions about TopoView glyph should be directed to Victor Strelets (strelets@bio.indiana.edu).
644  
645 =end html