File Coverage

blib/lib/Coro/AnyEvent.pm

Criterion	Covered	Total	%
statement	10	38	26.3
branch	0	2	0.0
condition	2	9	22.2
subroutine	4	16	25.0
pod	6	6	100.0
total	22	71	30.9

=head1 NAME

Coro::AnyEvent - integrate threads into AnyEvent

=head1 SYNOPSIS

 use Coro;
 use AnyEvent;
 # using both Coro and AnyEvent will automatically load Coro::AnyEvent

 # or load it manually for its utility functions:
 use Coro::AnyEvent;

 Coro::AnyEvent::sleep 5;     # block current thread for 5s
 Coro::AnyEvent::poll;        # poll for new events once
 Coro::AnyEvent::idle;        # block until process no longer busy
 Coro::AnyEvent::idle_upto 5; # same, but only up to 5 seconds

 Coro::AnyEvent::readable $fh, 60
    or die "fh didn't become readable within 60 seconds\n";

=head1 DESCRIPTION

When one naively starts to use threads in Perl, one will quickly run
into the problem that threads which block on a syscall (sleeping,
reading from a socket etc.) will block all threads.

If one then uses an event loop, the problem is that the event loop has
no knowledge of threads and will not run them before it polls for new
events, again blocking the whole process.

This module integrates threads into any event loop supported by
AnyEvent, combining event-based programming with coroutine-based
programming in a natural way.

As of Coro 5.21 and newer, this module gets loaded automatically when
AnyEvent initialises itself and Coro is used in the same process, thus
there is no need to load it manually if you just want your threads to
coexist with AnyEvent.

If you want to use any functions from this module, you of course still
need to C, just as with other perl modules.

Also, this module autodetects the event loop used (by relying on
L) and will either automatically defer to the high-performance
L or L modules, or will use a generic integration
method that should work with any event loop supported by L.

=head1 USAGE

=head2 RUN AN EVENT LOOP - OR NOT?

For performance reasons, it is recommended that the main program or
something else run the event loop of the event model you use, i.e.

   use Gtk2; # <- the event model
   use AnyEvent;
   use Coro:

   # initialise stuff
   async { ... };

   # now run mainloop of Gtk2
   main Gtk2;

You can move the event loop into a thread as well, although this tends to
get confusing:

   use Gtk2;
   use AnyEvent;
   use Coro:

   async { main Gtk2 };

   # do other things...
   while () {
      use Coro::AnyEvent;
      Coro::AnyEvent::sleep 1;
      print "ping...\n";
   }

You can also do nothing, in which case Coro::AnyEvent will invoke the event
loop as needed, which is less efficient, but sometimes very convenient.

What you I is to block inside an event loop
callback. The reason is that most event loops are not reentrant and
this can cause a deadlock at best and corrupt memory at worst.

Coro will try to catch you when you block in the event loop
("FATAL: $Coro::IDLE blocked itself"), but this is just best effort and
only works when you do not run your own event loop.

To avoid this problem, start a new thread (e.g. with C)
or use C to run blocking tasks.

=head2 INVERSION OF CONTROL

If you need to wait for a single event, the rouse functions will come in
handy (see the Coro manpage for details):

   # wait for single SIGINT
   {
      my $int_w = AnyEvent->signal (signal => "INT", cb => Coro::rouse_cb);
      Coro::rouse_wait;
   }

=head2 EVENT MODULES OTHER THAN ANYEVENT

Keep in mind that, as shipped, Coro and Coro::AnyEvent only work with
AnyEvent, and only when AnyEvent is actually used (i.e. initialised), so
this will not work:

   # does not work: EV without AnyEvent is not recognised
   use EV;
   use Coro;

   EV::loop;

And neither does this, unless you actually I AnyEvent for something:

   # does not work: AnyEvent must be initialised (e.g. by creating watchers)
   use EV;
   use AnyEvent;
   use Coro;

   EV::loop;

This does work, however, because you create a watcher (condvars work,
too), thus forcing AnyEvent to initialise itself:

   # does work: AnyEvent is actually used
   use EV;
   use AnyEvent;
   use Coro;

   my $timer = AE::timer 1, 1, sub { };

   EV::loop;

And if you want to use AnyEvent just to bridge between Coro and your event
model of choice, you can simply force it to initialise itself, like this:

   # does work: AnyEvent is initialised manually
   use POE;
   use AnyEvent;
   use Coro;

   AnyEvent::detect; # force AnyEvent to integrate Coro into POE
   POE::Kernel->run;

=head1 FUNCTIONS

Coro::AnyEvent also offers a few functions that might be useful.

=over 4

=cut

package Coro::AnyEvent;

use common::sense;

use Coro;
use AnyEvent ();

our $VERSION = 6.512;

#############################################################################
# idle handler

our $IDLE;

#############################################################################
# 0-timeout idle emulation watcher

our $ACTIVITY;

sub _activity {
   $ACTIVITY ||= AE::timer 0, 0, \&_schedule;
}

Coro::_set_readyhook (\&AnyEvent::detect);

AnyEvent::post_detect {
   my $model = $AnyEvent::MODEL;

   if ($model eq "AnyEvent::Impl::EV" and eval { require Coro::EV }) {
      # provide faster versions of some functions
      Coro::EV::_set_readyhook ();

      eval '
         *sleep = \&Coro::EV::timer_once;
         *poll  = \&Coro::EV::_poll;
         *idle  = sub() {
            my $w = EV::idle Coro::rouse_cb;
            Coro::rouse_wait;
         };
         *idle_upto = sub($) {
            my $cb = Coro::rouse_cb;
            my $t = EV::timer $_[0], 0, $cb;
            my $w = EV::idle $cb;
            Coro::rouse_wait;
         };
         *readable = sub($;$) {
            EV::READ  & Coro::EV::timed_io_once $_[0], EV::READ , $_[1]
         };
         *writable = sub($;$) {
            EV::WRITE & Coro::EV::timed_io_once $_[0], EV::WRITE, $_[1]
         };
      ';
      die if $@;

   } elsif ($model eq "AnyEvent::Impl::Event" and eval { require Coro::Event }) {
      Coro::_set_readyhook undef;
      # let Coro::Event do its thing
   } else {
      # do the inefficient thing ourselves
      Coro::_set_readyhook \&_activity;

      $IDLE = new Coro sub {
         my $_poll = AnyEvent->can ("_poll")
                  || AnyEvent->can ("one_event"); # AnyEvent < 6.0

         while () {
            $_poll->();
            Coro::schedule if Coro::nready;
         }
      };
      $IDLE->{desc} = "[AnyEvent idle process]";

      $Coro::idle = $IDLE;

      # call the readyhook, in case coroutines were already readied
      _activity;
   }

   # augment condvars
   unshift @AnyEvent::CondVar::ISA, "Coro::AnyEvent::CondVar";
};

=item Coro::AnyEvent::poll

This call will block the current thread until the event loop has polled
for potential new events and instructs the event loop to poll for new
events once, without blocking.

Note that this call will not actually execute the poll, nor will it wait
until there are some events, just block until the event loop has polled
for new events, so other threads will have a chance to run.

This is useful when you have a thread that does some computations, but you
still want to poll for new events from time to time. Simply call C
from time to time:

   my $long_calc = async {
      for (1..10000) {
         Coro::AnyEvent::poll;
         # do some stuff, make sure it takes at least 0.001s or so
      }
   }

Although you should also consider C or C in such cases.

=item Coro::AnyEvent::sleep $seconds

This blocks the current thread for at least the given number of seconds.

=item Coro::AnyEvent::idle

This call is similar to C in that it will also poll for
events. Unlike C, it will only resume the thread once there are no
events to handle anymore, i.e. when the process is otherwise idle.

This is good for background threads that shouldn't use CPU time when
foreground jobs are ready to run.

=item Coro::AnyEvent::idle_upto $seconds

Like C, but with a maximum waiting time.

If your process is busy handling events, calling C can mean that
your thread will never be resumed. To avoid this, you can use C
and specify a timeout, after which your thread will be resumed even if the
process is completely busy.

=item Coro::AnyEvent::readable $fh_or_fileno[, $timeout]

=item Coro::AnyEvent::writable $fh_or_fileno[, $timeout]

Blocks the current thread until the given file handle (or file descriptor)
becomes readable (or writable), or the given timeout has elapsed,
whichever happens first. No timeout counts as infinite timeout.

Returns true when the file handle became ready, false when a timeout
occurred.

Note that these functions are quite inefficient as compared to using a
single watcher (they recreate watchers on every invocation) or compared to
using Coro::Handle.

Note also that they only work for sources that have reasonable
non-blocking behaviour (e.g. not files).

Example: wait until STDIN becomes readable, then quit the program.

   use Coro::AnyEvent;
   print "press enter to quit...\n";
   Coro::AnyEvent::readable *STDIN;
   exit 0;

=cut

sub poll() {
   my $w = AE::timer 0, 0, Coro::rouse_cb;
   Coro::rouse_wait;
}

sub sleep($) {
   my $w = AE::timer $_[0], 0, Coro::rouse_cb;
   Coro::rouse_wait;
}

sub idle() {
   my $w = AE::idle Coro::rouse_cb;
   Coro::rouse_wait;
}

sub idle_upto($) {
   my $cb = Coro::rouse_cb;
   my $t = AE::timer shift, 0, $cb;
   my $w = AE::idle $cb;
   Coro::rouse_wait;
}

sub readable($;$) {
   my $cb = Coro::rouse_cb;
   my $w = AE::io $_[0], 0, sub { $cb->(1) };
   my $t = defined $_[1] && AE::timer $_[1], 0, sub { $cb->(0) };
   Coro::rouse_wait
}

sub writable($;$) {
   my $cb = Coro::rouse_cb;
   my $w = AE::io $_[0], 1, sub { $cb->(1) };
   my $t = defined $_[1] && AE::timer $_[1], 0, sub { $cb->(0) };
   Coro::rouse_wait
}

sub Coro::AnyEvent::CondVar::send {
   (delete $_[0]{_ae_coro})->ready if $_[0]{_ae_coro};

   &AnyEvent::CondVar::Base::send;
};

sub Coro::AnyEvent::CondVar::recv {
   until ($_[0]{_ae_sent}) {
      local $_[0]{_ae_coro} = $Coro::current;
      Coro::schedule;
   }

   &AnyEvent::CondVar::Base::recv;
};

1;

=back

=head1 IMPLEMENTATION DETAILS

Unfortunately, few event loops (basically only L and L)
support the kind of integration required for smooth operations well, and
consequently, AnyEvent cannot completely offer the functionality required
by this module, so we need to improvise.

Here is what this module does when it has to work with other event loops:

=over 4

=item * run ready threads before blocking the process

Each time a thread is put into the ready queue (and there are no other
threads in the ready queue), a timer with an C value of C<0> is
registered with AnyEvent.

This creates something similar to an I watcher, i.e. a watcher
that keeps the event loop from blocking but still polls for new
events. (Unfortunately, some badly designed event loops (e.g. Event::Lib)
don't support a timeout of C<0> and will always block for a bit).

The callback for that timer will C to other threads of the same or
higher priority for as long as such threads exists. This has the effect of
running all threads that have work to do until all threads block to wait
for external events.

If no threads of equal or higher priority are ready, it will cede to any
thread, but only once. This has the effect of running lower-priority
threads as well, but it will not keep higher priority threads from
receiving new events.

The priority used is simply the priority of the thread that runs the event
loop, usually the main program, which usually has a priority of C<0>. Note
that Coro::AnyEvent does I run an event loop for you, so unless the
main program runs one, there will simply be no event loop to C to
(event handling will still work, somewhat inefficiently, but any thread
will have a higher priority than event handling in that case).

=item * provide a suitable idle callback.

In addition to hooking into C, this module will also provide a
C<$Coro::idle> handler that runs the event loop. It is best not to take
advantage of this too often, as this is rather inefficient, but it should
work perfectly fine.

=item * provide overrides for AnyEvent's condvars

This module installs overrides for AnyEvent's condvars. That is, when
the module is loaded it will provide its own condition variables. This
makes them coroutine-safe, i.e. you can safely block on them from within a
coroutine.

=item * lead to data corruption or worse

As C cannot be used by this module (as it is the module
that implements it, basically), you must not call into the event
loop recursively from any coroutine. This is not usually a difficult
restriction to live with, just use condvars, C or other means
of inter-coroutine-communications.

If you use a module that supports AnyEvent (or uses the same event
loop as AnyEvent, making it implicitly compatible), and it offers
callbacks of any kind, then you must not block in them, either (or use
e.g. C), see the description of C in the
L module.

This also means that you should load the module as early as possible,
as only condvars created after this module has been loaded will work
correctly.

=back

=head1 SEE ALSO

L, to see which event loops are supported, L and
L for more efficient and more correct solutions (they will be
used automatically if applicable).

=head1 AUTHOR/SUPPORT/CONTACT

   Marc A. Lehmann
   http://software.schmorp.de/pkg/Coro.html

=cut